🌾

    MaxSil™ for Wheat Growers

    Frost resistance, salinity tolerance, better test weights

    MaxSil™ strengthens wheat cell walls, reduces lodging, protects against frost damage and unlocks nitrogen and phosphorus in the soil for greater fertiliser efficiency.

    New to MaxSil™?

    The short story, before you dig into wheat.

    MaxSil™ is Australia's #1 plant-available silicon bio-stimulant, made in Australia from 100% recycled glass. Silicon is the second most abundant element in soil - but almost none of it is in a form the plant can actually take up. MaxSil™ fixes that.

    Once a plant has access to silicon, it builds it into cell walls and leaf cuticles. That single change drives everything you'll see below on wheat: higher yield, less disease, frost/salt/heat tolerance, longer shelf life and lower NPK dependence.

    What the trials show

    Independent field trial data on wheat across Australia and internationally.

    • Tulloona NSW 2010 - highest test weights of the trial, +$3.05/ha even with NP inputs cut 50%.
    • Western Australia 2016 - MaxSil™ area unaffected by frost, +500 to 600 kg/ha (~30% lift) over control.
    • South Australia Riverland 2024 - wheat successfully established on a salt lake that hadn't germinated weeds in years.
    • Northern NSW 2014 to 2015 - MaxSil™ at 25 kg/ha delivered significant profitability lift.

    The mechanism

    Why silicon changes the game for wheat

    Silicon deposition in stem nodes reduces lodging - the biggest cause of harvest loss in high-yield wheat.

    Frost protection: WA 2016 trial showed the MaxSil™ strip untouched while the control was frosted.

    Salinity tolerance: silicon blocks Na uptake at the root - wheat now grows on paddocks that were bare for 50 years.

    Unlocks phosphate from tied-up soil reserves - cut your MAP/DAP spend without losing yield.

    Watch it in action

    Stevens Farm, Kellerberrin WA - Salt Remediation on Wheat & Barley

    More Stevens Farm saline land trials

    Barley on Salt Scald: Silicon Fertiliser Seed Coating Trial, Kellerberrin WA

    Barley grown from MaxSil coated seed was compared with an untreated control on extreme salt scald at Kellerberrin, WA. The treated barley showed better germination, bigger roots and less disease than the untreated control.

    Harvesting Salt Affected Barley Grown with Silicon Fertiliser, Kellerberrin WA

    Harvest footage from the Stevens family farm captures what the growers describe as 'our best ever crop on this paddock'. Ground cover is returning on the treated salt scald.

    From the paddock

    "Just wanted to say congratulations and thank you for your product. Tried it this year on a soak / salt lake that was at the stage of not even germinating any weeds. It now has a good stand of wheat on it which hasn't happened in years."

    - Grower, South Australia Riverland, July 2024

    MaxSil™ Return Calculator - Wheat

    Model what MaxSil™ could add to your operation. Defaults are seeded with published trial averages for wheat.

    NPK input reduction

    MaxSil™ boosts nutrient uptake - most growers pull inputs back by ~50%. Adjust the rates, reductions and prices to match your program.

    Projected result

    Extra yield per hectare420 kg/ha
    Extra revenue per hectare$160
    Baseline revenue (total)$665,000
    With MaxSil™ (total)$744,800
    Total extra revenue$79,800

    NPK savings

    Nitrogen saved37.5 t · $33,750
    Phosphorus saved10 t · $14,000
    Potassium saved15 t · $16,500
    Total NPK $ saved$64,250
    Total benefit (yield + inputs)$144,050
    Estimated MaxSil™ required this season: 10,000 kg at 20 kg/ha across 500 ha.

    Indicative model only. Results depend on soil type, climate, agronomic practice and market conditions. Trial averages sourced from MaxSil™ Information Pack 2024. Talk to a MaxSil™ agronomist for a program tailored to your paddock.

    How to apply

    MaxSil™ program for wheat

    Typical starting rate: 20 kg/ha. Your MaxSil™ agronomist will tune this to your soil test, water and target market - free of charge.

    • Seed coat: 5 kg MaxSil™ Powder per tonne of seed.
    • In-furrow: 20 kg/ha with starter fertiliser.
    • Also available in blend with your urea/MAP through participating distributors.

    Free for wheat growers

    Get a free analysis of your soil test results

    Send us your latest soil test and our agronomists will map exactly where silicon deficiency is costing you yield - and what a MaxSil™ program should look like on your ground.

    Submit your soil test →

    Wheat grower FAQs

    How does 20 kg/ha compete with 250 kg/ha of urea?+

    MaxSil™ doesn't replace nitrogen - it makes the nitrogen you already apply work harder and protects the crop from frost, salt and lodging.

    Is this the same as liming?+

    No - lime raises pH; MaxSil™ delivers plant-available silicon plus a small pH lift. They complement each other on acid ground.

    Get a MaxSil™ program built for your wheat paddock

    Our agronomist team will size a program around your soil, water and target market - no obligation.

    Your details are only used to contact you. We never share your information.