🌾

    MaxSil™ for Barley Growers

    Up to 17% yield lift, restores saline paddocks

    Formal replicated barley trials in Western Australia proved up to 17% yield gains and higher grain protein. On extreme saline soil at Kellerberrin, MaxSil™ seed-coated barley produced a crop where nothing had grown in 50 years.

    New to MaxSil™?

    The short story, before you dig into barley.

    MaxSil™ is Australia's #1 plant-available silicon bio-stimulant, made in Australia from 100% recycled glass. Silicon is the second most abundant element in soil - but almost none of it is in a form the plant can actually take up. MaxSil™ fixes that.

    Once a plant has access to silicon, it builds it into cell walls and leaf cuticles. That single change drives everything you'll see below on barley: higher yield, less disease, frost/salt/heat tolerance, longer shelf life and lower NPK dependence.

    What the trials show

    Independent field trial data on barley across Australia and internationally.

    • Independent WA replicated trials 2023 to 2024 - up to 17% yield lift on saline, acid and non-limiting soils with a MaxSil™ seed coat.
    • Kellerberrin WA 2020 to 2023 - barley established on paddocks that had not supported a blade of grass in 50 years.
    • Leaf tissue analysis - reduced Na uptake, increased grain weight.

    The mechanism

    Why silicon changes the game for barley

    Silicon at the root blocks sodium uptake - the mechanism behind the Kellerberrin recovery.

    Higher grain plumpness and test weight = malt-grade premiums instead of feed rejection.

    Only 8 kg/ha as a seed coat - one of the cheapest per-hectare inputs in your program.

    From the field

    MaxSil™ treated barley on saline paddock in Western Australia
    Kellerberrin WA - MaxSil™ seed-coated barley on ground that hadn't grown weeds in 50 years.

    Watch it in action

    Dry-land Salinity Success - MaxSil™ Seed Coating on Maximus Barley, Kellerberrin WA

    More Stevens Farm saline land trials

    Barley on Salt Scald: Silicon Fertiliser Seed Coating Trial, Kellerberrin WA

    Barley grown from MaxSil coated seed was compared with an untreated control on extreme salt scald at Kellerberrin, WA. The treated barley showed better germination, bigger roots and less disease than the untreated control.

    Harvesting Salt Affected Barley Grown with Silicon Fertiliser, Kellerberrin WA

    Harvest footage from the Stevens family farm captures what the growers describe as 'our best ever crop on this paddock'. Ground cover is returning on the treated salt scald.

    From the paddock

    "The extremely saline block had not supported growth of a single blade of grass since the family commenced cropping some 50 years ago. After MaxSil™ seed coating we finally have a barley crop."

    - Grower, Kellerberrin WA (2022 harvest)

    MaxSil™ Return Calculator - Barley

    Model what MaxSil™ could add to your operation. Defaults are seeded with published trial averages for barley.

    NPK input reduction

    MaxSil™ boosts nutrient uptake - most growers pull inputs back by ~50%. Adjust the rates, reductions and prices to match your program.

    Projected result

    Extra yield per hectare480 kg/ha
    Extra revenue per hectare$168
    Baseline revenue (total)$560,000
    With MaxSil™ (total)$627,200
    Total extra revenue$67,200

    NPK savings

    Nitrogen saved30 t · $27,000
    Phosphorus saved8 t · $11,200
    Potassium saved12 t · $13,200
    Total NPK $ saved$51,400
    Total benefit (yield + inputs)$118,600
    Estimated MaxSil™ required this season: 3,200 kg at 8 kg/ha across 400 ha.

    Indicative model only. Results depend on soil type, climate, agronomic practice and market conditions. Trial averages sourced from MaxSil™ Information Pack 2024. Talk to a MaxSil™ agronomist for a program tailored to your paddock.

    How to apply

    MaxSil™ program for barley

    Typical starting rate: 8 kg/ha. Your MaxSil™ agronomist will tune this to your soil test, water and target market - free of charge.

    • Seed coat: 5 kg MaxSil™ Powder per tonne of seed - this is the WA trial protocol.
    • In-furrow option: 8–10 kg/ha with starter.
    • Straightforward integration with existing seeder set-ups.

    Free for barley growers

    Get a free analysis of your soil test results

    Send us your latest soil test and our agronomists will map exactly where silicon deficiency is costing you yield - and what a MaxSil™ program should look like on your ground.

    Submit your soil test →

    Barley grower FAQs

    Do I still need gypsum?+

    Gypsum treats the soil (calcium displacing sodium). MaxSil™ treats the plant (silicon blocking sodium uptake). Together they are the fastest path to recovery.

    Get a MaxSil™ program built for your barley paddock

    Our agronomist team will size a program around your soil, water and target market - no obligation.

    Your details are only used to contact you. We never share your information.